Made for your next DIY project
Your project. Your shape. Your kit.
Start with a sheet of conductive fabric and matching tape. Plan a pouch, add a liner or build a custom enclosure around the size you need.
- 01Conductive fabricOne continuous 42.5 × 72-inch sheet. Cut to suit your project.
- 02Conductive tape10 m of tape, 2.6 cm wide, for your seams and joins.
- 03Printed insertsA product card and the included 5G Safety Guide.
A little planning goes a long way
Measure. Make. Check.
Plan your fit
Measure the item and sketch your design. Allow extra material for seams, folds and a closing flap before you cut.
Build your shape
Cut and assemble the fabric around your project. Use the tape for joins, and plan how you will finish raw edges and close any openings.
Test the finished project
Check your complete design for the signal and use you have in mind. Inspect seams and closures again after handling.
A closer look at the evidence
Sample-tested. Project-dependent.
A fabric sample was tested at eight frequencies using a shielding-room aperture method. The results shown are from report EMCC202501039.
A material test is different from testing a finished pouch. Your seams, closure, design and intended signal still need their own check.
| Test frequency | Sample result |
|---|---|
| 1 GHz | 84.2 dB |
| 3 GHz | 78.5 dB |
| 5 GHz | 64.4 dB |
| 8 GHz | 63.5 dB |
| 10 GHz | 54.1 dB |
| 13 GHz | 67.4 dB |
| 15 GHz | 67.4 dB |
| 18 GHz | 74.7 dB |
Discrete sample measurements, not a continuous-band rating or a guarantee for a finished enclosure.
Before your first project
Good questions. Clear answers.
Know what you are making, what is included and what to check before you rely on it.
Is this a ready-made bag?
No. You receive fabric, conductive tape and printed inserts. You cut and assemble the material to make your own project. Devices, scissors, sewing tools and finished bags are not included.
Which size should I choose?
Choose by your planned cut size, with extra material for seams and closures. The 1-yard kit has a 36-inch fabric length and 5 m of tape. The 2-yard kit has one continuous 42.5 × 72-inch sheet and 10 m of tape. Both include 2.6 cm-wide tape.
Can I cut or sew the fabric?
Yes, it is material for DIY projects. Raw cut edges can fray, so plan edge finishing as part of your design. A sewn seam alone does not establish the performance of the finished project.
Will it block a signal if I just drape it over something?
A partial cover is different from a closed enclosure. Do not assume that draping the fabric over an item provides complete signal isolation. Plan and test the whole project, including its openings and closure.
Can my device stay connected inside it?
A project that isolates a wireless signal can also interrupt the connection you normally use. This kit does not promise signal blocking while preserving normal wireless service.
Does the kit include grounding hardware?
The listed contents are fabric, conductive tape and printed inserts. Grounding hardware is not included. Follow instructions suited to your particular project; do not improvise a connection to electrical wiring.
Can I wash it?
Contact us for care guidance before washing or dry-cleaning the material. Do not assume that a cleaning method used for ordinary cloth will preserve its performance.
What should I know before using it near electronics?
This is conductive material. Keep it clear of exposed electrical contacts and do not block device ventilation. The kit is intended for DIY material projects, not personal protective clothing.
